Silos can be costly to maintain if you don't do the essential repairs to prevent further deterioration of the silo. In any repair, Marietta Silos tries to identify the root cause of the damage to the silo and incorporate those findings into our restoration and design procedure.

 

The silo beam pocket rests on a bearing plate to support the roof. Beam pockets are a critical point in the silo as these roof beams hold up the roof slab and all the necessary equipment to operate the bulk storage system. Often the concrete under the plate spalls leaving the beam pocket at risk for failure. The structural integrity of the beam pocket is reestablished by having structural steel placed to ensure the integrity of the repaired beam pocket. A high-strength, non-stick grout is used to patch the spalled area.

 

Delamination of concrete is caused by the lack of bonding to the interior structural steel reinforcement of the silo, which weakens the silo's structural capacity. To repair silo wall delamination in extreme cases, additional reinforcement may be added to the silo wall or a new concrete steel reinforced liner can be installed, returning the silo to normal operating conditions.

 

Be proactive with silo repair – contact us to request a quote.