When to schedule silo restoration depends on more than the condition of your silo. While it is never advisable to postpone necessary silo repairs, the time of year you schedule your silo repair or restoration can impact your bottom line.

 

 

The same weather conditions that can impact the performance and lifespan of your silo, extreme heat or cold, heavy rain, and severe wind, can also affect silo restoration. Work undertaken during extreme temperature conditions can be slower, while heavy rain can make it difficult or impossible to repair concrete or apply waterproof coatings. When the silo roof or other high areas of the silo need to be repaired, high winds can pose safety risks during the restoration process.

 

 

Scheduling routine maintenance during temperate times of the year can help you reduce expenses by catching and addressing problems early and reducing downtime. Temperate times of the year, like the spring and fall, tend to provide better working conditions for a variety of silo repairs. These ideal weather conditions can make a repair or restoration go more quickly – reducing the cost of labor and your downtime.

 

 

Emergent silo issues or a silo that shows signs of new or worsening damage should be inspected as soon as possible. Regularly viewing the silo exterior can help facilities find new or worsening issues that might necessitate earlier or more frequent inspections. For silos that were properly designed and constructed, much of this damage is preventable or can be minimized by regular inspections, silo maintenance and a full understanding of proper procedures.

 

Routine inspections identify minor issues as well as more serious problems that can lead to preventable structural failures like silo collapse. Common problems that cause concrete structure and concrete silo failure include foundation deterioration, roof collapse, unsuitable material filling and unloading procedures, silo wall delamination or deterioration, and silo discharge cone or bin floor issues. Additional important silo maintenance includes airflow unit inspection and regular, professional silo cleaning to avoid material buildup issues. When it comes to steel silos, they often suffer from corrosion and buckling, which can be inspected using wear-measure thickness ultrasonic gauges. Marietta Silos can address these concrete silo issues and any other necessary silo restoration types, regardless of stored material.

 

Repairing silo problems quickly, before they become an emergency, helps save money and can reduce or eliminate safety issues. The long-term savings, reduced liability, and reduction of unplanned downtime that results from professional silo inspections and silo restoration should be seen as an investment as it is far cheaper to address issues early before they lead to silo failure.

 

USA Silo Service can clean, inspect, and maintain your concrete storage dome. Most domes are situated at a 35-degree angle and can range from 150 to 250 feet in diameter. The unique shape of the storage dome creates a non-standard flow pattern that makes material build up much more likely and much more difficult to remove from dome walls and fluidizing equipment.

 

Concrete storage domes suffering from restricted airflow need comprehensive cleaning and maintenance. Hardened stored material that is caked on dome walls needs to be removed through professional cleaning to return the dome to its original efficiency. Air pads and other fluidizing equipment may also need to be restored or replaced if there are signs of corrosion or defects affecting its usability.

 

Bulk storage is the term for buildings that store bulk commodities such as cement, sand, frac sand, salt, fertilizer, feed, grains, aggregates, carbon, chips, seeds, peanuts, coke, blasting powder – and the list goes on.

 

Regular professional silo cleaning is a necessary tool that ensures maximization of production while protecting employee safety. All too often, however, we postpone silo cleaning to delay the economic effects that downtime and lost production may bring.

 

When regularly cleaned by a professional silo cleaning company, a silo yields maximum production while providing a safe working environment. So how do you have your silo regularly cleaned, minimize downtime and save money in the process?

 

The USA Silo Service solution is employing The Boss proprietary silo cleaning method, which is 2/3 more powerful than conventional cleaning methods. Since The Boss moves more material per hour, our system delivers optimal cleaning quickly and correctly, resulting in less downtime and production loss, ultimately saving you money.

 

So don't put off that silo cleaning any longer. Let The Boss silo cleaning machine and USA Silo Service help you get back on a regular silo cleaning schedule to maximize your efficiency, production and safety.

 

Contact us for a dome silo cleaning quote.

Silo construction has been an integral part of Marietta Silos services since 1916. Stave silos are among the types of silo construction methods that are used to create a silo that is suited for your current material handling needs. Other silo construction methods include jumpform and slipform silos.

 

Marietta Silos developed the technology for stave silo construction back in 1920 and is the only company today that produces stave silos at a thickness of 5 ¾" which creates added durability. Reinforcements like galvanized hoops are often used to help compress the silo walls and introduce tension for increased stability.

 

Stave silos utilize an interlocking technology using precast concrete blocks which enables the stave silo to manage your silo needs for years to come. Internal joints of stave silo interior and exterior walls need to be sealed using cementitious coatings which creates a smooth outward appearance when the stave silo is completed. Multiple discharge types may be used when constructing a stave silo including flat floor, cone, tunnel discharge, and side discharge.

 

If you're thinking about starting your own silo construction project, contact the experts at Marietta Silos. Marietta Silos brings over a century of silo construction and design experience to walk you through the steps of deciding what silo type and sizes will work best for your particular application.

 

Links:

Watch our Silo Construction Video:
https://www.youtube.com/watch?v=qFRzM86qDyA&t=73s      

 

Start Your Silo Construction Project:
https://www.mariettasilos.com/silo-construction#stave-silos